Process model

RE: Process model

deepakg681722 — Fri, 09 Sep 2022 10:34:45 GMT

Thank you Udhay

RE: Process model

udhayakumarm000856 — Fri, 09 Sep 2022 10:32:38 GMT

Thanks It is worked

RE: Process model

Harshit Bumb (Appyzie) — Fri, 09 Sep 2022 08:37:47 GMT

You can label the interface any number but that doesn't solves the actual problem here. Anyway, udhayakumarm0001, going back to same interface is possible but not in the same instance, when you have this process plugged as a site page.
You can just end the process when cancel button is pressed on interface 2 and that should take you back to interface 1.

RE: Process model

deepakg681722 — Fri, 09 Sep 2022 08:16:34 GMT

you can read OP's question again and if required have a look on the image as well which i attached. on click on cancel button in Interface 2 we are using XOR gateway to check the condition. if submit button click then the flow will end else it will go to user input task(interface1).

Please see the UIT labels as well.

Humble request to have a look on below.

RE: Process model

Harshit Bumb (Appyzie) — Fri, 09 Sep 2022 08:14:05 GMT

Read my question again. I am asking about going from 2 to 1 in the same instance with a start form.

RE: Process model

deepakg681722 — Fri, 09 Sep 2022 08:13:04 GMT

To go to interface 2 from the interface 1(start form) there is a button which will submit the form and take the flow to form 2.

[quote userid="74089" url="~/discussions/f/process/25808/process-model"] I am having a interface(interface 1) inside that after I hitting the submit button it is going to display and another interface(interface 2)[/quote]

RE: Process model

Harshit Bumb (Appyzie) — Fri, 09 Sep 2022 08:11:03 GMT

You can ONLY use a process with a start form. There is a difference.
Also, f you are asking the OP to map interface 1 in the start node then how do you plan to connect interface 2 with 1?

RE: Process model

deepakg681722 — Fri, 09 Sep 2022 08:01:21 GMT

Harshit, If you know we can use process model with start form into the site as well. so if you see the picture i mentioned start event with interface1 which mean OP has to give interface 1 in the start form and OP also mentioned they move to second interface which is not into interface 1. i.e he is using UIT for that and now on click on the cancel button he want to go the start form which is not possible but want to stay on the same instance which means we have to use another UIT. Please correct if i am wrong somewhere.

For more i am quoting his query below:

[quote userid="74089" url="~/discussions/f/process/25808/process-model"]that is outside of the landing page interface [/quote]

[quote userid="74089" url="~/discussions/f/process/25808/process-model"]In that Interface 2 there is cancel button when I hit that it want to come back to the interface 1 in the landing page[/quote]

[quote userid="74089" url="~/discussions/f/process/25808/process-model/100812#100812"]I want to stay on the same instance[/quote]

Moreover, if he want to complete the successive form in the single sitting then he can use the Activity chaining as well between all the nodes(UIT).

RE: Process model

Harshit Bumb (Appyzie) — Fri, 09 Sep 2022 07:56:46 GMT

The first thing OP mentioned was that he is using this process as a landing page on a site.

Here is a reference for you - docs.appian.com/.../Sites.html

RE: Process model

deepakg681722 — Fri, 09 Sep 2022 07:54:39 GMT

Then you can follow the below approach.

RE: Process model

udhayakumarm000856 — Fri, 09 Sep 2022 07:50:27 GMT

I want to stay on the same instance

RE: Process model

deepakg681722 — Fri, 09 Sep 2022 07:45:03 GMT

One question, on click of cancel you want to end the process instance and start a new one or you want to stay on the same instance? if you want to stay on the same instance then there will be a start form and user input tasks with the same interface(1st UIT with interface1 and 2nd UIT with interface2 and process start form with interface1). both should be there for the process start form interface. After the cancel click, you will go towards the user input task1 which is having the same interface as process start form.

RE: Process model

udhayakumarm000856 — Fri, 09 Sep 2022 07:41:32 GMT

No I cannot able to create the user input task becoz this process model is used in site and a site must have a process start form

RE: Process model

deepakg681722 — Fri, 09 Sep 2022 07:39:12 GMT

you can not come back to process start form. You can create a seperate user input task for the same form which you used into start event. From the second user input task, you can set the value to these button and pass it to process variable and check the variable value via XOR gateway and set the flow accordingly.

RE: Process model

Harshit Bumb (Appyzie) — Fri, 09 Sep 2022 07:38:47 GMT

If interface 2 is outside the start form and in the process as a separate UIT, then just end the process and you'll land back to the start form.
If it is inside your start form, then you can use variables to control what interface you want to show.
Like change the value of a variable to 1 to see interface 1 and change the value to 2 to see interface 2