KB-1768 Processes absent in searches and "Unexpected Exec Engine 1 was trying to send an Incremental Update." error in the engine logs

Jordan Horwat — Fri, 02 Nov 2018 13:18:56 GMT

Current Revision posted to Appian Knowledge Base by Jordan Horwat on 11/2/2018 1:18:56 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Appian 18.2 and Earlier

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

YYYY-MM-DD HH:MM:SS [PA000XX] {paXXX.kdb X} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 Only

Processes show up in the monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is inconsistency between data in the process execution and process analytics engines.

If the issue is observed after resetting the analytics engines, only processes created prior to the reset will be affected.

This issue has been addressed via AN-110387 in the following hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and earlier.

Last Reviewed: November 2018

Tags: known issues, fixed issues, processes, infrastructure

KB-1768 Processes not showing up in searches and "Unexpected Exec Engine 1 was trying to send an Incremental Update." error in the engine logs

Jordan Horwat — Fri, 02 Nov 2018 09:18:34 GMT

Revision 19 posted to Appian Knowledge Base by Jordan Horwat on 11/2/2018 9:18:34 AM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Appian 18.2 and Earlier

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

YYYY-MM-DD HH:MM:SS [PA000XX] {paXXX.kdb X} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 Only

Processes show up in the monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is inconsistency between data in the process execution and process analytics engines.

If the issue is observed after resetting the analytics engines, only processes created prior to the reset will be affected.

This issue has been addressed via AN-110387 in the following hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and earlier.

Last Reviewed: November 2018

Tags: known issues, fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Jordan Horwat — Fri, 02 Nov 2018 09:15:22 GMT

Revision 18 posted to Appian Knowledge Base by Jordan Horwat on 11/2/2018 9:15:22 AM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Appian 18.2 and Earlier

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

YYYY-MM-DD HH:MM:SS [PA000XX] {paXXX.kdb X} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 Only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is inconsistency between data in the process execution and process analytics engines.

If the issue is observed after resetting the analytics engines, only processes created prior to the reset will be affected.

This issue has been addressed via AN-110387 in the following hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and earlier.

Last Reviewed: November 2018

Tags: known issues, fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Jordan Horwat — Tue, 30 Oct 2018 16:26:01 GMT

Revision 17 posted to Appian Knowledge Base by Jordan Horwat on 10/30/2018 4:26:01 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Appian 18.2 and Below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

YYYY-MM-DD HH:MM:SS [PA000XX] {paXXX.kdb X} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 Only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is inconsistency between data in the process execution and process analytics engines.

If the issue is observed after resetting the analytics engines, only processes created prior to the reset will be affected.

This issue has been addressed via AN-110387 in the following hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and earlier.

Last Reviewed: October 2018

Tags: known issues, fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Jordan Horwat — Tue, 30 Oct 2018 16:25:36 GMT

Revision 16 posted to Appian Knowledge Base by Jordan Horwat on 10/30/2018 4:25:36 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Appian 18.2 and Below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

YYYY-MM-DD HH:MM:SS [PA000XX] {paXXX.kdb 15388} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 Only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is inconsistency between data in the process execution and process analytics engines.

If the issue is observed after resetting the analytics engines, only processes created prior to the reset will be affected.

This issue has been addressed via AN-110387 in the following hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and earlier.

Last Reviewed: October 2018

Tags: known issues, fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Jordan Horwat — Tue, 30 Oct 2018 16:25:28 GMT

Revision 15 posted to Appian Knowledge Base by Jordan Horwat on 10/30/2018 4:25:28 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Appian 18.2 and Below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

YYYY-MM-DD HH:MM:SS [PA000XX] {paXXX.kdb 15388} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 Only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is inconsistency between data in the process execution and process analytics engines.

If the issue is observed after resetting the analytics engines, only processes created prior to the reset will be affected.

This issue has been addressed via AN-110387 in the following hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and earlier.

Last Reviewed: October 2018

Tags: known issues, fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Tue, 30 Oct 2018 16:06:11 GMT

Revision 14 posted to Appian Knowledge Base by Rebecca Jonas on 10/30/2018 4:06:11 PM

Symptoms

Appian 18.2 and Below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

YYYY-MM-DD HH:MM:SS [PA000XX] {paXXX.kdb 15388} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 Only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is inconsistency between data in the process execution and process analytics engines.

If the issue is observed after resetting the analytics engines, only processes created prior to the reset will be affected.

This issue has been addressed via AN-110387 in the following hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and earlier.

Last Reviewed: October 2018

Tags: fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Tue, 30 Oct 2018 10:48:15 GMT

Revision 13 posted to Appian Knowledge Base by Rebecca Jonas on 10/30/2018 10:48:15 AM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

2015-11-11 20:57:33 [PA000XX] {paXXX.kdb 15388} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is data not being in sync between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last Reviewed: October 2018

Tags: fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Tue, 23 Oct 2018 15:50:15 GMT

Revision 12 posted to Appian Knowledge Base by Rebecca Jonas on 10/23/2018 3:50:15 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

2015-11-11 20:57:33 [PA000XX] {paXXX.kdb 15388} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is data not being in sync between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last Reviewed: October 2018

Tags: fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Tue, 23 Oct 2018 15:49:39 GMT

Revision 11 posted to Appian Knowledge Base by Rebecca Jonas on 10/23/2018 3:49:39 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

2015-11-11 20:57:33 [PA000XX] {paXXX.kdb 15388} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last Reviewed: October 2018

Tags: fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Tue, 23 Oct 2018 15:47:04 GMT

Revision 10 posted to Appian Knowledge Base by Rebecca Jonas on 10/23/2018 3:47:04 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors similar to the following may be present in db_PX*.log and/or db_PA*.log files located in <APPIAN_HOME>/logs/:

2015-11-11 20:57:33 [PA000XX] {paXXX.kdb 15388} (Default) ERROR .a.p.ANLYZE.i "Unexpected Exec Engine 1 was trying to send an Incremental Update."

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

17.2 HF63
17.3.239.0
17.4.164.0
18.1.129.0
18.2.68.0

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last Reviewed: October 2018

Tags: fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Tue, 09 Oct 2018 09:50:36 GMT

Revision 9 posted to Appian Knowledge Base by Rebecca Jonas on 10/9/2018 9:50:36 AM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

A potential cause for this issue is desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

17.2 HF63
17.3.239.0
17.4.164.0
18.1.129.0
18.2.68.0

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last Reviewed: October 2018

Tags: fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Mon, 08 Oct 2018 16:27:13 GMT

Revision 8 posted to Appian Knowledge Base by Rebecca Jonas on 10/8/2018 4:27:13 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

17.2 HF63
17.3.239.0
17.4.164.0
18.1.129.0
18.2.68.0

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last Reviewed: October 2018

Tags: fixed issues, processes, infrastructure

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Mon, 08 Oct 2018 16:26:54 GMT

Revision 7 posted to Appian Knowledge Base by Rebecca Jonas on 10/8/2018 4:26:54 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

17.2 HF63
17.3.239.0
17.4.164.0
18.1.129.0
18.2.68.0

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last Reviewed: October 2018

Tags: fixed issues, processes

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Fri, 14 Sep 2018 16:27:31 GMT

Revision 6 posted to Appian Knowledge Base by Rebecca Jonas on 9/14/2018 4:27:31 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian /design or /designer interfaces.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

17.2 HF63
17.3.239.0
17.4.164.0
18.1.129.0
18.2.68.0

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last reviewed: September 2018

Tags: fixed issues, processes

DRAFT INT-XXXX Processes not showing up in searches

Rebecca Jonas — Wed, 05 Sep 2018 18:56:39 GMT

Revision 1 posted to Appian Knowledge Base by Rebecca Jonas on 9/5/2018 6:56:39 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last reviewed: September 2018

Tags: fixed issues, processes

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Wed, 05 Sep 2018 15:49:51 GMT

Revision 5 posted to Appian Knowledge Base by Rebecca Jonas on 9/5/2018 3:49:51 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches in Appian Designer/the Designer interface.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports in Appian Designer.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

17.2 HF63
17.3.239.0
17.4.164.0
18.1.129.0
18.2.68.0

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last reviewed: September 2018

Tags: fixed issues, processes

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Wed, 05 Sep 2018 15:06:59 GMT

Revision 4 posted to Appian Knowledge Base by Rebecca Jonas on 9/5/2018 3:06:59 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

17.2 HF63
17.3.239.0
17.4.164.0
18.1.129.0
18.2.68.0

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last reviewed: September 2018

Tags: fixed issues, processes

DRAFT KB-XXXX Processes not showing up in searches

Rebecca Jonas — Wed, 05 Sep 2018 15:05:47 GMT

Revision 3 posted to Appian Knowledge Base by Rebecca Jonas on 9/5/2018 3:05:47 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

18.2.68.0
18.1.129.0
17.4.164.0
17.3.239.0
17.2 HF63

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last reviewed: September 2018

Tags: fixed issues, processes

DRAFT INT-XXXX Processes not showing up in searches

Rebecca Jonas — Wed, 05 Sep 2018 15:04:59 GMT

Revision 2 posted to Appian Knowledge Base by Rebecca Jonas on 9/5/2018 3:04:59 PM

Symptoms

Appian 18.2 and below

Processes do not consistently show up across searches.

Incremental update errors may be present in process execution and/or process analytics logs.

Appian 18.2 only

Processes show up in monitoring tab but not in process reports.

Cause

Desynchronization between process execution and process analytics engines.

This issue may also occur after resetting analytics engines. If this is the cause, only processes created prior to the reset would be affected.

This issue has been addressed via AN-110387 in the following hotfixes:

18.2.68.0
18.1.129.0
17.4.164.0
17.3.239.0
17.2 HF63

Action

Apply the latest hotfix to your Appian installation.

Affected Versions

This article applies to Appian 18.2 and below.

Last reviewed: September 2018

Tags: fixed issues, processes