KB-1772 Wrong process started by subprocess nodes and "exception 'FLI: Invalid Handle'" errors printed in the process execution logs

Jordan Horwat — Tue, 06 Nov 2018 20:58:17 GMT

Current Revision posted to Appian Knowledge Base by Jordan Horwat on 11/6/2018 8:58:17 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Certain subprocess nodes start unintended processes.

An error of the following type is observed in the db_PX*.log located under <APPIAN_HOME>/logs/ on the server which hosts process execution engines:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056 and AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to all versions of Appian from Appian 17.2 to Appian 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess nodes and "exception 'FLI: Invalid Handle'" errors printed in the process execution logs

Jordan Horwat — Tue, 06 Nov 2018 15:56:57 GMT

Revision 14 posted to Appian Knowledge Base by Jordan Horwat on 11/6/2018 3:56:57 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Certain subprocess nodes start unintended processes.

An error of the following type is observed in the db_PX*.log located under <APPIAN_HOME>/logs/ on the server which hosts process execution engines:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056 and AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to all versions of Appian from Appian 17.2 to Appian 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess nodes and "exception 'FLI: Invalid Handle'" errors printed in the process execution logs

Tejas Kargutkar — Tue, 06 Nov 2018 14:46:21 GMT

Revision 13 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 2:46:21 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Certain subprocess nodes start different, unintended processes.

An error of the following type is observed in the db_PX*.log located under <APPIAN_HOME>/logs/ on the server which hosts Process Execution engines:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to all versions of Appian from Appian 17.2 to Appian 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess nodes and "exception 'FLI: Invalid Handle'" errors printed in the process execution logs

Jordan Horwat — Tue, 06 Nov 2018 13:32:26 GMT

Revision 12 posted to Appian Knowledge Base by Jordan Horwat on 11/6/2018 1:32:26 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Certain subprocess nodes start different, unintended processes.

An error of the following type is observed in the db_PX*.log located in <APPIAN_HOME>/logs/:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to all versions of Appian from Appian 17.2 to Appian 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess nodes and "exception 'FLI: Invalid Handle'" errors printed in the process execution logs

Jordan Horwat — Tue, 06 Nov 2018 13:31:39 GMT

Revision 11 posted to Appian Knowledge Base by Jordan Horwat on 11/6/2018 1:31:39 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Some subprocess nodes start different, unintended processes.

An error of the following type is observed in the db_PX*.log located in <APPIAN_HOME>/logs/:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to all versions of Appian from Appian 17.2 to Appian 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 13:16:30 GMT

Revision 10 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 1:16:30 PM

Symptoms

Some subprocess nodes start different processes than what they are supposed to launch.

Error of the following type is observed in the db_PX*.log located in <APPIAN_HOME>/logs/:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 13:14:33 GMT

Revision 9 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 1:14:33 PM

This issue has been resolved in an Appian hotfix/new Appian version. Please apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Symptoms

Some subprocess nodes start different processes than what they are supposed to launch.

Error of the following type is observed in the db_PX*.log located in <APPIAN_HOME>/logs/:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 12:47:12 GMT

Revision 8 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 12:47:12 PM

Symptoms

Some subprocess nodes start different processes than what they are supposed to launch.

Error of the following type is observed in the db_PX*.log located in <APPIAN_HOME>/logs/:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 12:44:13 GMT

Revision 7 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 12:44:13 PM

Symptoms

Some subprocess nodes start different processes than what they are supposed to launch.

Error of the following type is observed in the db_PX*.log located in <APPIAN_HOME>/logs/:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 12:42:25 GMT

Revision 6 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 12:42:25 PM

Symptoms

Some subprocess nodes start different processes than what they are supposed to launch.

Error of the following type is observed in the db_PX* logs:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *ids*

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 12:41:26 GMT

Revision 5 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 12:41:26 PM

Symptoms

Some subprocess nodes start different processes than what they are supposed to launch.

Error of the following type is observed in the db_PX* logs:

ERROR .a.s.loader "Rollback"
ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 12:39:36 GMT

Revision 4 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 12:39:36 PM

Symptoms

Some subprocess nodes are starting different processes than what they are supposed to launch.

Rollback.L files are observed in <AE_HOME>/logs directory on the server where the Execution engines are hosted.

Error of the following type is observed in the db_PX* logs:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 12:38:36 GMT

Revision 3 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 12:38:36 PM

Symptoms

Some subprocess nodes are starting different processes than what they are supposed to launch.

Rollback.L files are observed in <AE_HOME>/logs directory on the server where the Execution engines are hosted.

Error of the following type is observed in the db_PX* logs:

ERROR .a.p.PROCESS.i.tuning "EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids: *

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Appian 17.2 Hotfix Package L

Appian 17.3 Hotfix Package I

Appian 17.4 Hotfix Package H

Appian 18.1 Hotfix Package D

Appian 18.2 Hotfix Package A

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Tue, 06 Nov 2018 12:12:01 GMT

Revision 2 posted to Appian Knowledge Base by Tejas Kargutkar on 11/6/2018 12:12:01 PM

Symptoms

Some subprocess nodes are starting different processes than what they are supposed to launch.

rollback.L files are observed in logs directory.

Error of the following type is observed in the db_PX* logs:

".a.p.PROCESS.i.tuning ERROR EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0.01900898 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids:

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Appian 17.2 Hotfix Package L

Appian 17.3 Hotfix Package I

Appian 17.4 Hotfix Package H

Appian 18.1 Hotfix Package D

Appian 18.2 Hotfix Package A

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure

DRAFT KB-XXXX Wrong process started by subprocess

Tejas Kargutkar — Mon, 05 Nov 2018 21:46:04 GMT

Revision 1 posted to Appian Knowledge Base by Tejas Kargutkar on 11/5/2018 9:46:04 PM

Symptoms

Some subprocess nodes are starting different processes than what they are supposed to launch.

rollback.L files are observed in logs directory.

Error of the following type is observed in the db_PX* logs:

".a.p.PROCESS.i.tuning ERROR EXITING .a.p.PROCESS.i.cleanup_process_model_timer (0.01900898 seconds): exception 'FLI: Invalid Handle', so will use safe mode next time. Suspicious ids:

Cause

This issue has been addressed via AN-107056, AN-107053 in the following Appian hotfixes/versions:

Appian 17.2 Hotfix Package L

Appian 17.3 Hotfix Package I

Appian 17.4 Hotfix Package H

Appian 18.1 Hotfix Package D

Appian 18.2 Hotfix Package A

Action

Apply the latest hotfix to your Appian installation or upgrade to the latest version of Appian.

Affected Versions

This article applies to Appian 17.2,17.3,17.4,18.1 and 18.2.

Last Reviewed: November 2018

Tags: known issues, engines, fixed issues, infrastructure