Skip to main content
S
saikiranb654094
November 22, 2023
Question

RPA

  • November 22, 2023
  • 25 replies
  • 0 views

in this process we are taking the link of my appian designer account  by the help of robotic recorder  we are opening the link by edge by clicking on select appliaction  after opening we are giving username and password after testing the bot it is not taking my username and password what i given   please reply  if any ones solution

    25 replies

    sriramk5349
    sriramk5349
    November 22, 2023

    Hi [mention:97af894a6e3743e0b2c7152a8e445f5d:e9ed411860ed4f2ba0265705b8793d05] ,

    After the recording is completed, please check the values in the main section whether the values are there or not. For username and password, please add the username and password in credentials and use those things in the main section.

    Usually after recording the task, we need to update the things in main section with proper values and credentials and if needed create process variables and use them.

      G
      gopalt0943
      November 23, 2023

      Hi [mention:97af894a6e3743e0b2c7152a8e445f5d:e9ed411860ed4f2ba0265705b8793d05] 

      If you're practicing, it's advisable to create two variables—one for the username and the other for the password. Before starting, ensure the robot is online. During the task recorder, select the username, use 'ID' as the selector, and update values by providing the variable created for the username. Follow the same process for the password. Afterward, click on 'Log In,' close the task recorder, save changes, and test in debugging mode.

      If you opt for the 'Update Value with Username and Password' interaction, create credentials for it. Then, during your process, access the credentials and populate the username and password sections.

      • Practice Setup:

        • Create two variables, one for the username and one for the password.
        • Ensure the robot is online before starting.

      • Task Recorder Steps:

        • Use the task recorder to:
          • Select the username with the 'ID' selector.
          • Update values using the variable for the username.
          • Repeat the process for the password.
          • Click 'Log In,' close the task recorder, and save changes.
          • Test in debugging mode.

      • Alternative Interaction:

        • If using the 'Update Value with Username and Password' interaction:
          • Create credentials for this purpose.
          • In your process, access the credentials.
          • Populate the username and password sections accordingly.

      • Refer below screenshot for better understanding:
        N
        narmadad4950
        November 23, 2023

        When we are following the above mentioned procedure instead of getting username and password we are getting the values like "true", "true"

        can you please suggest me what i have to do 

        Thank you.

        G
        gopalt0943
        November 24, 2023

        Hello, [mention:a50b74c7bff64d999fa1372fd3b7099a:e9ed411860ed4f2ba0265705b8793d05] 
        Before using the task recorder, did you create variables for the username and password and store the values in these variables?
        Can you please share the configuration screenshot for both activities for better understanding?

        D
        deronk8418
        December 7, 2023

        I recommend checking the accuracy of your provided username and password, ensuring correct identification of dynamic elements, incorporating delays, and consulting the support resources for your RPA tool for further assistance.  But yes, if you need help from an essay writer service then I strongly advice you to take help from this academized.com/essay-writing-service website because I have taken help from that website and their writers are trustworthy and always there to help you anytime you want.

        Terms & ConditionsAccessibility statement